CAS LP1000N series - Int(Initialize PLU and MSG Data)

59
4.8 INIT (Initialize PLU and MSG data)
You can initialize all PLU’s data , MESSAGE data or ALL data.
How to clear memory
1) To go to PROGRAM mode, press 1 by using numeric keys and MODE key.
2) Press v key six times.
3) The WEIGHT display shows “init”.
4) Press PRT/* key and the display shows “init ALL”.
If you want to clear all PLU data and message data, Input the password (22757) and
press the PRT/* key.
If you want to clear PLU or MESSAGE, press v key or u key to select PLU or MSG and
press PRT/* key to clear it.
5) If you wish to finish PROGRAM mode, press C key.