66
5.4 Printhead Check (CHESS)
You can use this function to check the quality of print and if there are any scratches or burn
on the printhead. This function produces a pattern on the label which you can use to
determine the condition of the printhead.
1) To go to ACCOUNT mode, press 2 by using numeric keys and MODE key.
2) Press v key two times. The display shows “CHESS”.
3) Press PRT/* key. The display shows “CHESS tyPE 1”
4) Enter chess type and press PRT/* key. The scale will issue a label.
Compare labels to the samples above to determine the condition of your printhead.
5) To go to CHESS menu, press C key. To Finish ACCOUNT mode, press the C key again.
To Next Page
Loading...
