CAS LP1000N series - 3. Operation; 3.1 REG mode Operations; 3.1.1 Simple Weighing

17
3.1.2 How to Use TARE
Known Tare:
If you know the weight of container you may use this method to enter the tare.
For example, if the weight of the container is 10g press the 1, 0, and TARE key. Call up a PLU and place a
commodity then you will see the net weight.
Unknown Tare:
If you do not know the weight of the container you may use this method. Place the container on the platter
and press the TARE key.
Call up a PLU and place the commodity on the platter then you will see the net weight.
Releasing the Tare
To release the tare, remove all items from the platter and then press the TARE key.
3.1.3 How to Use FOR Key
Call up a PLU or enter unit price of non PLU.① ② Press the FOR key. ③ Press 5 key on the
numeric keypad.
④ Press the FOR
key again.
⑤ Press 5,0,0 key on
the numeric keypad for
total price
⑥ Press PRT/* on the numeric
keypad.