CAS LP1000N series - 4.7.2 Programming the Time (SET #2)

36
4.7.3 Programming the Department Number (SET #3)
How to program the department number
1) To go to PROGRAM mode press 1 by using numeric keys and MODE key.
2) Press v key five times.
3) The WEIGHT display shows “SEt”.
4) Press PRT/* key and the display shows “SEt EntEr”.
5) Press 3 key and PRT/* key.
6) The display shows “dPtno EntEr 0”.
7) The number in the TOTAL PRICE display is what the department number is currently programmed to.
Type the department number. Department number can be from 0 to 99.
8) Press PRT/* key. The display shows “SEt”.
9) If you wish to finish PROGRAM mode, press C key.