CAS LP1000N series - Page 38

39
3) Label mask
How to program the label mask
1) To go to PROGRAM mode, press 1 by using numeric keys and MODE key.
2) Press v key five times.
3) The WEIGHT display shows “SEt”.
4) Press PRT/* key and the display shows “SEt EntEr”.
5) Press 4 key and PRT/* key.
6) The display shows “LAbEL EntEr 1”.
7) To program label mask, press 3 key. The display shows “LAbEL MASk”.
8) If you do not want to print Shop, you have to enter FDFF by hexadecimal and press PRT/* key.