52
1) Enabling currency display
1) The display shows "CUrr".
2) Press 1 key and the display shows "CUrr USinG 0"
3) Select 0 (NO use) or 1 (Currency use). Press PRT/* key to save and exit.
2) Set decimal point and currency rate
1) The display shows "CUrr".
2) Press 2 key and the display shows "CUrr, dP___, ______0"
3) Setting decimal point of currency. The decimal (.) digit may be locating 0 to 6. After setting the
decimal point (DP) press PRT/* key and the display shows "CUrr, rAtE__, ______ 0"
3) Set the decimal point of calculated total price
1) The display shows "CUrr".
2) Press 3 key and the display shows "CUrr rES-dP 0"
3) You can set the calculated total price's decimal point. The decimal digit may be 0 to 6.Then,
press PRT/* key
To Next Page
Loading...
