29
How to program the shop data
1) To go to PROGRAM mode press 1 by using numeric keys and MODE key.
2) Press v key four times.
3) The WEIGHT display shows “SHoP”.
4) Press PRT/* key. The display shows “SHoP 01.01”. The numbers in the UNIT PRICE display represent
the line number and character number on which your cursor is at. The number to the left of the decimal is
the line number you are on(01 to 02). The number to the right is the number of the character position on
which you are(01 to 30).
5) Type in the shop name using the Alpha-numeric keypad. If you make any mistakes press C key.
You may now begin typing your shop data using your Alpha-numeric keypad. After you type each line
press ENTER key when you are done typing a line. If you wish to skip a line press v key. If you want to
go up a line press v key. Press s key or t key to scroll left or right on a line of text. As you type you
will see the text scroll in the TOTAL PRICE display.
6) Press PRT/* key.
7) If you wish to finish PROGRAM mode press C key
To Next Page
Loading...
