13
KEY Function
This key displays the time and date in REG mode.
Used to go to PROGRAM mode and ACC mode.
This key works like a Caps Lock key on a computer. It is used to type capital letters.
You can tell if the SHIFT function is active by an indicator lamp in the
UNIT PRICE display.
This is the Left Arrow Key. It is used to scroll the cursor to the left when
programming alphanumeric data.
This is the Right Arrow Key. It is used to scroll the cursor to the right when
programming alpha-numeric data.
This is the Up Arrow Key. It is used to scroll from Line to Line when
programming commodity names, message data, or store name and address.
It is also used to move up the System Maps. In REG mode, it is used to go to
AUTO mode.
This is the Down Arrow Key. It is used to scroll from Line to Line when
programming commodity names, message data, or store name and address.
It is also used to move down the System Maps.
This key is used to set the Zero Point to 0.00.
For foreign language.
These keys are used to enter numbers as “text” for a commodity name, message
data, or store name and address. The symbol keys are also used to type text.
These are the Letter Keys. They are used to type in text.
This is the Space Key. It functions the same as a space bar on a computer keyboard.
This key is the ENTER Key. It functions just like an Enter Key on a computer.
It is used to go to Line 2 or the next Line after typing some text.
PGM mode is used to set all of the scale's functions and PLUs.
REG mode is used for operating the scale.
ACC is used to generate sales reports.
In AUTO mode labels are issued when the weight is stabilized and greater than the weight that
you set in PROGRAM mode. The use of PRT/* key will also generate a label.
To Next Page
Loading...
