CAS LP1000N series - 4.7.11 Set Printer Sensors (SET #12)

55
4) Press PRT/* key and the display shows "SEt EntEr 0".
5) Press 1 key and 2 key and PRT/* key.
1) Peel-off sensor
peel-off sensor in not
covered(opened)
peel-off sensor is
covered(closed)
1) The display shows "SEt PoFF".
2) Press Enter key and the display shows "SEt 130 PoFF 8"
3) Read set value when peel-off sensor is covered (closed).
Display shows "SEt 130 PoFF248." (248=numeric value of sensor)
4) Input average value of peel-off sensor when sensor is open and close.
EX) open value=8, close value=248, average value=128
5) Press Enter key to save and exit.