CAS NC-1 - Set Mode

14
5. SET MODE
1. How to enter & exit SET MODE
How to enter SET Mode
Turn on the power while pressing TARE key , after displaying the message
and then enter the SET Mode.
Return to the normal mode if you press the HOLD key or kg ◀▶ lb key long.
SET Menu (F0 - F6)
Menu DESCRIPTION Menu DESCRIPTION
F 0 Setting the value of Digital-Filter F 4 Weight Backup
F 1 Setting the stable time of weight F 5 Setting the hold type
F 2 Setting the stable range of weight F 6
Setting the time of Auto Display
Off
F 3 Setting the Back Light
Available keys
KEY DESCRIPTION
ON/OFF KEY
Menu Cycle ( F0 ~F6→F0)
ZERO KEY
Increase the setting value
TARE KEY
Decrease the setting value
HOLD KEY or kg ◀▶ lb KEY
Store the current setting value (Not exit)
HOLD KEY or kg ◀▶ lb KEY
After storing all setting value and then exit SET Mode
(Ref. Function of useful key is explaned at above available keys)