17
Description of HOLD Function
1. When the F5 is set to 00
Case 1 ( When the hold key is pressed in unloaded state) : Auto-Average
Hold Function
If you press the Hold key in unloaded state, after displaying the
AH on and the Hold function Is started.
Just When the weight is changed(above the 1divison) , being
displayed HOLD and the changed weight is hold
If you want to release the Hold function, have to press Hold
key in unloaded state certainly
When the Hold function is released, being displayed the message
AHoff
Case 2 (When the hold key is pressed in loaded state) : Manual Hold Function
When you want to hold the current weight, just press Hold key.
After displaying the hd on and the Hold function Is started.
In Hold state
- if the weight is not changed, the current weight is not changed
- if the weight is changed(above the 10% of Max capa), the
current weight is changed and the Hold function is released
- Whenever unloaded states, the Hold function is released automatically
- Also you want to release the Hold function, have to press Hold key
in unloaded state certainly
- If Hold function is released, you can see the massage hdoff.
2. When the F5 is set to 01
The maximum value of weight is showed when the Hold key is pressed
If the Hold key is pressed once, the peak Hold function is started
If Hold function is released, you can see the massage
If the Hold key is pressed again, the Hold function is released
If Hold function is released, you can see the massage Phoff.
(Ref> If the weight is ‘0’lb or ‘0’kg, this function is not operated.)
To Next Page
Loading...
