What does Err 31 mean on CAS PDS?
- SScott AdamsSep 10, 2025
If your CAS Scales display 'Err 31', it indicates that the current password does not match the previous password. To resolve this, input the new password again.
What does Err 31 mean on CAS PDS?
If your CAS Scales display 'Err 31', it indicates that the current password does not match the previous password. To resolve this, input the new password again.
What does Err 11 mean on CAS PDS Scales?
If your CAS Scales display 'Err 11', it means that the unit of weight is different. This issue occurs because the unit of weight calibration is not the same, preventing further processing.
How to troubleshoot Err 01 on CAS PDS?
If your CAS Scales display 'Err 01', it indicates a failure in the initial value of A/D. To troubleshoot this, check the L/C connector and test A/D conversion in Test Mode 2.
Performs A/D conversion test for the load cell to check its functionality and value.
Tests the RS-232 serial communication with a computer, covering transmission and reception.
Tests RS-422/485 serial communication with a computer, covering transmission and reception.
Tests the printer functionality by performing a printer test and checking output.
Configures settings for weight backup, including selecting options for usage and saving.
Configures the hold type for weighing, allowing selection of average, maximum, or current values.
Sets up key lock functionality, allowing selection of which keys to lock and the lock state.
Configures the usage of COM1 (RS-232) port, selecting between no use, CAS, Limit, Printer, or ECR mode.
Provides pinout diagrams for connecting the scale to a PC via COM1 using different port types.
Details the CAS Protocol structure and ASCII code representation for data transmission, including status and device information.
Explains the Limit Protocol structure, covering stable/unstable states, gross/net data, and zero/limit signals.
Outlines the Command Mode Protocol, detailing commands for reading and writing data like tare value and device ID.