16
d. Self-test on printing
■ The printing self-test function may be also executed on test mode in
"II. Programming mode".
e. Zero function
■ The scale is not in initial zero point when there is(are) any item(s) on the
platter user may need to set zero using "zero" key.
① Press while counting 0~9 after turning on
the scale by pressing . Then, it automatically
prints out the test report. Please refer to the
sample report on page 104.
① The scale is not in initial zero point.
② Set zero point. User can set zero only within
±2% of capacity. For example, the 6kg
POScale model is ±120g.
SAELS MODE
To Next Page
Loading...
