f. Tare function
■ One Time Tare
This function is to subtract the weight of actual tare.
① Place a tare on the platter. For example, 10g.
② Subtract the tare weight. After setting the tare
user may place item on the platter, and the
scale reads only the weight of item.
③ Remove tare from the platter if user does not
need tare function. At this time the weight shows
negative value of tare.
④ To clear up the tare value, and go back to set
zero point, press the key again.
SAELS MODE
To Next Page
Loading...
