■ Successive Tare
This function is to subtract two successive tares.
The successive tare can be set in the calibration mode. Please contact your
dealer if you want to use "Successive Tare".
① Place a tare on the platter. For example, 10 g.
Press the key.
② The scale will subtract the tare weight.
③Place another tare on the platter.
For example, 20g.
④ The scale will add up the weight of tares. After
setting the successive tares user may place item
on the platter, and the scale reads only the
weight of item.
SAELS MODE
To Next Page
Loading...
