g. Printing PLU code
h. Printing all reports
■ Select "YES" for all reports printed or "No" for only
closing without other reports when executing "close".
①(Using key and go to option setting
mode from main menu. And then press )
to get into PLU code printing mode.
②User may select YES or NO by pressing "1" or
"0" respectively, and press to save it.
①(Using key and go to option setting
mode from main menu. And then press )
to get into all report printing mode.
②User may select YES or NO by pressing "1" or
"0" respectively, and press to save it.
PROGRAM MODE
To Next Page
Loading...
