4 - INSTRUMENTS/CONTROLS
47
A24293
12. ROTOR SPEED CONTROL SWITCH - This is a rocker switch which operates as follows:
Fast Position - Depress front half of the switch to increase the rotor speed.
Slow Position - Depress rear half of the switch to decrease the rotor speed.
Depressing the switch in either direction will cause the fan speed and rotor speed to be displayed
in place of the current display. Fan and rotor speeds will be displayed for 4 seconds after the switch
is released, then the display will return to what was previously displayed.
13. VARIABLE PROPULSION MOTOR SWITCH (If Equipped) - Depress front half of the switch for
high range and fast speeds. Depress rear half of the switch for low range and slow speeds.
14. POWER GUIDE AXLE SWITCH (If Equipped) - Depress front half of the switch to ENGAGE the
Power Guide Axle. Depress rear half of the switch to DISENGAGE the Power Guide Axle.
NOTE: The Propulsion Motor will not operate in high and the Power Guide Axle will not engage when the gear shift
lever is moved into third gear.
15. PARKING BRAKE SWITCH - To engage the Parking Brake depress front half of the switch. To
disengage the Parking Brake depress rear half of the switch.
16. THROTTLE CONTROL LEVER - Used to control the speed of the engine. To increase engine
speed move the lever forward. To decrease engine speed, move the lever to the rear.
13
14
12
15
16
To Next Page
Loading...
