SECTION 2 - CONTROLS, INSTRUMENTS AND OPERATION
2ï80
In various screen options the memory screen icon (1)
can be accessed by using the soft key, encoder, or
touch screen.
Items that can be seen in this screen are:
Current date and time Memory number
Job name
Date and time when the memory has been stored
Quantity of uncut bales
Quantity of cut bales made with the crop cutting
system knives inserted (if installed) Moisture content
(where fitted)
Bale length (where fitted)
Bale weight (where fitted)
By using the soft key, encoder, or touch screen to
move through the screen fields the Job name and
bale counts can be edited using the alpha numeric
keypad.
NOTE: By a push and rotation of the rotary encoder it is
possible to view each memory screen, and by a double
click the encoder will take you to a quick access panel for
faster selection of numbers.
Job name (editable)
Uncut bales (editable)
Cut bales where a cutter is fitted (editable)
When all the data is set by the soft key, encoder, or
touch screen the save icon (1) can be selected and
the data is stored into the memory.
There is capacity for up to 25 memories to be stored
and when full upon the 26th input the first memory is
deleted.
To Next Page
Loading...