SECTION 2 - CONTROLS, INSTRUMENTS AND OPERATION
2ï81
As discussed in field settings moisture content (1),
bale length (2), and bale weight (3), options are
available.
These options are then reflected in the memory
screen, that will display the bale length, moisture, and
weight or weights of the current crop.
NOTE: These options are not editable, but can be recorded, as
for example bale weight.
Bale weight (where fitted)
The bale weight option where configured is used as a
visual display for a single or total bale weight of a batch
of bales.
This weight in kgs can be recorded in the memory or
recorded for your records.
• Actual bale weight at drop off
• Average bale weight from start to stop of which is
related to memory count and is resettable.
• Total weight from start to stop (resettable)
To display the bale weight select the screen settings
set-up and ensure bale weight is selected be it metric
or imperial.
Refer also to screen set-up, page 2-78.
To Next Page
Loading...