SECTION 2 - CONTROLS, INSTRUMENTS AND OPERATION
2ï9
line of the tractor.
Adjust the drawbar to the following dimensions for all
baler hitches in the low position:
X1 400 mm (15 3/4 in)
X2 minimum 100 mm (3 15/16 in)
Y1 150 to 300 mm (200 mm recommended)
[5 7/8 in to 11 13/16in (7 7/8 in recommended)]
Y2 450 to 500 mm (17 11/16 in to 19 11/16 in)
To Next Page
Loading...