STARTrNG
PROCEDURE
1. For Lawn Mowers prior to S/N 9746098, place the travel control lever in neutral
and the mower drive lever in the "OFF" position.
For
Lawn Mowers S/N
9746098
and after, place in neutral, depress the clutch-
brake pedal and place the mower drive lever in the "OFF" position.
*The engine may not start when the mower is in the lowest cutting position.
Raise
the mower or pull the mower drive lever toward the "OFF" position to allow the
engine to start.
2. Position the Choke Throttle Lever all the way to the "Choke" position if the engine
is
cold. If engine is warm, leave the lever set at the "Slow" position. Experience will
quickly
tell
you which lever setting to use under various temperature conditions.
FIGURE
10
-16-
To Next Page
Loading...
