Case 80 - Drive Belt R E P L a C E M E N

DRIVE BELT REPLACEMENT
1. The mower and mower drive belt must be removed before attempting to replace
traction drive belt. Refer to pages 34 and 35.
2. After the mower drive belt has been removed. Push idler arm in to remove ten
from belt.
3. Slip old belt off pulleys and install new belt.
A
CAUTION: Be sure gasoline is thoroughly drained and battery
moved as described in the "Sto'age" section of this manual bet'
standing mower uri end for storage or service.
•32-