CONTROLLER
3 - 6
CX EXCAVATORS
CONTROLLER CALIBRATION PROCEDURE
3. After selecting the model code, press the Work mode switch to select
the Territory field.
“?” shown with a dark background means that item is selected.
4. The Territory will change everytime the Travel mode switch is pressed.
Press the Travel mode switch until the number 2 appears in the
Territory field for Case North America.
MACHINE: SH0200 –3
TERRITORY: ? LANGUAGE: ?
CONT. P/N KHR XXXX
MACHINE: SH0200 –3
TERRITORY: 2 LANGUAGE: ?
CONT. P/N KHR XXXX
To Next Page
Loading...
