To Next Page
S
Stanley WestSep 12, 2025
What to do if CashCode FrontLoad MFLV-2110 bill pathway is not empty?
- CChristina OwensSep 12, 2025
If the bill pathway is not empty, open the receiving path and check that it is clean.
What to do if CashCode FrontLoad MFLV-2110 bill pathway is not empty?
If the bill pathway is not empty, open the receiving path and check that it is clean.
What to do if CashCode Bank Note Validator has an error during CPU exchange with Sense-A-Click modules?
If an error occurred during CPU exchange with Sense-A-Click modules, disconnect power from the validator. Open the cover, check if Sense-A-Click modules are properly installed, and verify that Sense-A-Click modules correspond to the correct software type/version.
What to do if there is a bill jam in entry slot of CashCode FrontLoad MFLV-2110 cassette and no credit issued?
If there is a bill jam in the entry slot of the cassette and no credit is issued, remove the cassette from the bill validator and clean the path.
Details the 8-position DIP switches (SW1) for bill denomination settings.
Defines the 4-position DIP switches (SW2) for bill orientation and communication.
Instructions for collecting validated bills by removing the cassette.
Step-by-step guide for updating software using a single-download memory card.
Procedure for updating software using a multi-download smart stick.
Lists status light indications, errors, and fault handling for software updates.
Details diagnostic errors indicated by the status light during operation mode.
General| Brand | CashCode |
|---|---|
| Model | FrontLoad MFLV-2110 |
| Category | Bank Note Validator |
| Language | English |
