Casio 110CR - Read Only Test for EEPROM; Battery Voltage Check; Print Test; Time Test

- 14 -
4. Read only test for EEPROM (This test is effected at EEPROM version.)
Press "4" key and "SUB TOTAL" key.
Execute read check in test area of EEPROM continually.
To escape this test, turn the mode switch to "OFF".
In case an error happens, the machine beep an error sound and issues an error receipt.
5. Battery voltage check
Press "7" key and "SUB TOTAL" key.
Display the voltage level of memroy protection battery.
To escape this test, turn the mode switch to "OFF".
VCC=5.35V(Standard)
6. Print test
Press "8" key and "SUB TOTAL" key.
The machine prints all chatacter.
7. Time test
Press "9" key and "SUB TOTAL" key.
Display the time.
To escape this test, press "C" key.
1 2 3 4 5 6 7 8 9 0 ST #
1 2 3 4 5 6 7 8 9 0 1 2 ST #
# # # # # # # # # 8
• • • • • • • • • 8
Excepy US
US
Except US
US
Nomal end receipt Error end receipt
5 3 5
Voltage level
2 3 - 5 9 1 2
# 8
0 0 0 0 0 0 0 0 0 0 CA Z
1 1 1 1 1 1 1 1 1 1 CH 1
2 2 2 2 2 2 2 2 2 2 RA 2
3 3 3 3 3 3 3 3 3 3 PO 3
4 4 4 4 4 4 4 4 4 4 NT 4
5 5 5 5 5 5 5 5 5 5 STCK
6 6 6 6 6 6 6 6 6 6 AT +
7 7 7 7 7 7 7 7 7 7 CG -
8 8 8 8 8 8 8 8 8 8 TX X
9 9 9 9 9 9 9 9 9 9 RF@
- - - - - - - - - -
, , , , , , , , , , * #
• • • • • • • • • •%NS
# # # # # # # # # # VDTA
Receipt sample
Note
: US version is printed out
14 characters.