E-30
Viewing the Latest Signal Reception Results
You can use the procedure below to check whether or not the last signal receive
operation was successful.
To check the latest signal reception results
In the Timekeeping Mode, press A.
• If the watch was able to perform a successful signal
receive operation since midnight, the second hand will
move to YES (Y). If the watch has been unable to
receive any signal successfully, the second hand will
move to NO (N).
• The watch will return to the Timekeeping Mode after five
seconds or when you press A.
• The current receive result is cleared when the first auto
receive operation is performed on the following day. This
means YES (Y) indicates successful signal reception
since the start of the current day.
• If you adjust the time or date setting manually, the
second hand will move to NO (N).
30
YES (Y)
NO (N)
To Next Page
Loading...
