Casio 5061 - To Toggle the Home City Time between Standard Time and Daylight Saving Time

E-36
Note that you cannot switch between • STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After all the settings are the way you want, press 4. A to return to the Timekeeping
Mode.
To toggle the Home City time between standard time and daylight saving time
Perform the step 1 under “To confi gure Home City settings” on page E-34.1.
Each time you select a city code, the
• z Hour Hand, c Minute Hand, and
b Lower Dial Hand move to the current time for that city code. Do not perform
the next operation until these hands stop moving.
Press 2. B to toggle the time for the city code of the currently selected Home City
between STD (standard time)/DST (daylight saving time).
In the city code setting mode, the
• v Left Dial Hand indicates the current daylight
saving time setting as STD (standard time) or DST (daylight saving time).
Note that you cannot switch between
• STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.