E-4
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-34) to confi gure
your Home City and daylight saving time settings.
Important!
Proper time calibration signal reception and World Time settings depend on correct
Home City, time, and date settings in the Timekeeping Mode. Make sure you
confi gure these settings correctly.
3. Set the current time.
To set the time using a time calibration signal
•
See “To get ready for a receive operation” (page E-23).
To set the time manually
•
See “Confi guring Current Time and Date Settings Manually” (page E-38).
To Next Page
Loading...
