E-69
■ The current time setting changes after I set it manually.
You may have the watch confi gured for Auto Receive of the time calibration signal
(page E-25), which will cause the time to be adjusted automatically according to your
currently selected Home City. If this results in the wrong time setting, check your
Home City setting and correct it, if necessary (page E-34).
■ The current time setting is off by one hour.
Possible Cause Remedy Page
Signal reception on a day for
switching between STD (standard
time)/DST (daylight saving time) may
have failed for some reason.
Perform the operation under “To get ready
for a receive operation”. The time setting
will be adjusted automatically as soon as
signal reception is successful.
E-23
If you are unable to receive the time
calibration signal, change the STD
(standard time)/DST (daylight saving time)
setting manually.
E-36
To Next Page
Loading...
Need help?
General
