E-80
Friction caused by certain conditions (frequent external force, sustained rubbing, impact, •
etc.) can cause discoloration of painted components.
If there are printed fi gures on the band, strong rubbing of the printed area can cause
•
discoloration.
Failure to clean dirt from the watch for long periods can cause fl uorescent color to fade.
•
Wash dirt off with water as soon as possible and then dry the watch.
Semi-transparent resin parts can become discolored due to sweat and dirt, and if
•
exposed to high temperatures for long periods.
Contact an authorized CASIO Service Center to have resin components replaced. Note
•
that you will be charged for replacement costs.
Natural Leather and Imitation Leather Bands
Allowing the watch to remain in contact with other items or storing it together with other •
items while it is wet for long periods can cause the color of the other items to transfer to
the natural leather or imitation leather band of the watch. Be sure to dry off the watch
thoroughly before storing it and make sure it is not in contact with other items.
To Next Page
Loading...
Need help?
General
