Casio 5618 User Manual

Copyrights and Registered
Copyrights
●
The Bluetooth
®
word mark and logos are
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.
●
iPhone and App Store are registered
trademarks of Apple Inc. in the United
States and other countries.
●
iOS is a trademark or registered trademark
of Cisco Systems, Inc.
●
GALAXY is a registered trademark of
Samsung Electronics Co., Ltd.
●
Android and Google Play
TM
are trademarks
or registered trademarks of Google LLC.
●
Other company names and product names
used herein are trademarks or registered
trademarks of their respective companies.
Troubleshooting
I can’t pair the watch with a
phone.
Q1
I’ve never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install EDIFICE Connected on
your phone?
EDIFICE Connected needs to be installed
on your phone in order to connect with the
watch.
l
A
Install the required app on your
phone.
Are your phone’s Bluetooth settings
configured correctly?
Configure the phone’s Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
●
“Settings”
n
“Bluetooth”
n
On
●
“Settings”
n
“Privacy”
n
“Bluetooth
Sharing”
n
“EDIFICE Connected”
n
On
Android Users
●
Enable Bluetooth.
Other than the above.
Some phones need to have BT Smart
disabled to use EDIFICE Connected. For
details about setting procedures, see your
phone documentation.
On the Home Screen, tap: “Menu”
n
“Settings”
n
“Bluetooth”
n
“Menu”
n
“BT Smart settings”
n
“Disable”.
I can’t reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is EDIFICE Connected running?
The watch cannot re-connect with your
phone unless EDIFICE Connected is
running on the phone. On your phone’s
Home Screen, tap the “EDIFICE
Connected” icon. Then on the watch, hold
down (D) for at least two seconds.
Have you tried turning your phone off and
then back on again?
Turn your phone off and then back on, and
then tap the “EDIFICE Connected” icon.
Next, on the watch, hold down (D) for at
least two seconds.
Q2
I can’t connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while the phone’s Airplane Mode is enabled.
After disabling your phone’s Airplane Mode,
go to its Home Screen and tap the “EDIFICE
Connected” icon. Then on the watch, hold
down (D) for at least two seconds.
Operation Guide 5618
18

Casio 5618 Specifications

General

Brand	Casio
Model	5618
Category	Watch
Language	English