Q3
I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On your phone, re-enable Bluetooth, and then
go to the Home Screen and tap the “EDIFICE
Connected” icon. Next, on the watch, hold
down the (D) for at least two seconds.
Q4
I can’t connect after turning off the
phone.
Turn your phone off and then back on, and
then tap the “EDIFICE Connected” icon. Next,
on the watch, hold down (D) for at least two
seconds.
Q5
e
Is not displayed, and the watch is
not connected with my phone.
To preserve battery power, the watch will
automatically terminate Bluetooth connection
with your phone temporarily if it detects the
connection has been unused for
approximately one hour. Auto Time
Adjustment is disabled while there is no
connection. To reconnect, press any watch
button.
Phone-Watch Connection
Q1
I can’t establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn your phone off and then back on, and
then tap the “EDIFICE Connected” icon.
Next, on the watch, hold down (D) for at
least two seconds.
Is the watch’s Airplane Mode enabled?
Connection with your phone is not
possible while the watch’s Airplane Mode
is enabled. To connect with your phone,
disable the Airplane Mode.
l
Using the Watch in a Medical Facility or
Aircraft
Has the watch been re-paired with the
phone?
Delete the pairing information from
EDIFICE Connected and your phone
(iPhone only), and then re-pair them.
l
Deleting Pairing Information from
EDIFICE Connected
l
iPhone Only
Deleting the phone’s pairing
information
l
C
Pair the watch with a phone.
If you are unable to establish a
connection...
After deleting pairing information from the
watch, re-pair it with your phone.
l
Deleting Pairing Information from the
Watch
l
C
Pair the watch with a phone.
Changing to a Different
Phone Model
Q1
How do I connect my watch to a
different phone?
Delete the pairing information from your watch
and then pair it with the phone you want to
connect with.
l
If you purchase another phone
Auto Time Adjustment by
Bluetooth Connection (Time
Adjustment)
Q1
When does the watch adjust its time?
Your watch can connect with a paired phone
to adjust its time setting. Auto time adjustment
is performed at the times described below.
●
After your phone’s time zone or summer
time setting is changed
●
After 24 hours or more have passed since
the last time adjustment using Bluetooth
connection
●
After 24 hours or more have passed since
city swapping using EDIFICE Connected or
watch operation
●
After 24 hours or more have passed since
the last home city change or time
adjustment using watch operation
Q2
Auto time setting is not correct.
Is
e
displayed?
To preserve battery power, the watch will
automatically terminate Bluetooth
connection with your phone temporarily if
it detects the connection has been unused
for approximately one hour. Auto Time
Adjustment is disabled while there is no
connection. To reconnect, press any
watch button.
Have 24 hours or more passed since the
last time adjustment using Bluetooth
connection?
Time adjustment using Bluetooth
connection is performed once every 24
hours. Auto time adjustment will be
performed when 24 hours or more have
elapsed since the last time adjustment
operation.
Have 24 hours or more has passed since
the last manual time adjustment, city
change, or city swapping operation?
Auto time adjustment is not performed for
24 hours after a manual time adjustment,
city change, or city swapping operation.
Auto time adjustment will resume after 24
hours or more have elapsed after either of
the above operations is performed.
Is the watch’s Airplane Mode enabled?
Connection with your phone is not
possible while the watch’s Airplane Mode
is enabled. To connect with your phone,
disable the Airplane Mode.
l
Using the Watch in a Medical Facility or
Aircraft
Operation Guide 5618
19
To Next Page
Loading...
Need help?
General
