Q3
The watch does not synchronize its
time setting with my phone when I
hold down (D) for at least two
seconds.
Connection with your phone is not possible
while the watch’s Airplane Mode is enabled.
To connect with your phone, disable the
Airplane Mode.
l
Using the Watch in a Medical Facility or
Aircraft
Q4
Time is not displayed correctly.
The phone’s time setting may be incorrect
because it is unable to connect with its
network due to being out of range, etc. If this
happens, connect the phone to its network
and then adjust the time setting.
Appointment timer
Q1
How do I disable the appointment
timer notification sound?
Use the procedure below to disable the
appointment timer notification sound.
l
Enabling or Disabling the Appointment
Timer Notification Sound
Q2
The appointment timer notification
sound does not sound.
Is appointment timer notification sound turned
on? If it isn’t, turn it on so it will sound.
l
Enabling or Disabling the Appointment
Timer Notification Sound
Q3
The appointment timer function does
not work.
The appointment timer becomes disabled if
you manually adjust the watch’s time setting.
Before using the Schedule Timer, connect the
watch with your phone and sync their time
settings.
l
Connecting with a Phone
Q4
[--:-- END] remains on the display
and I cannot use the appointment
timer even though settings are
configured to allow use of the
appointment timer.
Have you adjusted time settings
manually?
The appointment timer becomes disabled
if you manually adjust the watch’s time
setting. Before using the Schedule Timer,
connect the watch with your phone and
sync their time settings.
l
Connecting with a Phone
Is the appointment scheduled within 24
hours from your current time?
Up to five appointments, scheduled within
24 hours from your current time are sent
from your phone to the watch.
Alarms
Q1
The alarm does not sound.
Is the alarm setting turned on? If it isn’t, turn it
on so it will sound.
l
Configuring Alarm Settings
Battery
Q1
is flashing on the digital display.
This indicates that battery power is getting
low.
Have the battery replaced.
l
Battery Replacement
Q2
[R] is flashing on the digital display.
[R] may appear on the display when the
watch’s battery power is low, or if you use the
light or other function a number of times during
a short period, which momentarily causes the
battery level to go low. If this happens, all
watch functions, except for timekeeping, are
disabled.
If [R] remains on the display or if it keeps
appearing, it may indicate that the battery
needs to be replaced.
Operation Guide 5618
20