Casio 5672 User Manual

Q2
I can’t connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while your phone is in the Airplane Mode. After
exiting the phone’s Airplane Mode, go to the
Home Screen and tap the “CASIO
WATCHES” icon. Then on the watch, hold
down (D) until the second hand points to [C]
twice.
●
The second hand will point to [C] once after
about 0.5 seconds, and then a second time
after about 2.5 seconds.
3
0
Q3
I can’t establish a connection after
disabling the watch’s auto time
adjustment feature.
On the watch, enable auto time adjustment,
and then hold down (D) until the second hand
points to [C] twice.
●
The second hand will point to [C] once after
about 0.5 seconds, and then a second time
after about 2.5 seconds.
l
Using CASIO WATCHES to Configure
Settings
l
Using Watch Operations to Configure
Settings
3
0
Q4
I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On the phone, turn Bluetooth off and then back
on, and then tap the “CASIO WATCHES” icon
on the Home Screen. Next, on the watch, hold
down (D) until the second hand points to [C]
twice.
●
The second hand will point to [C] once after
about 0.5 seconds, and then a second time
after about 2.5 seconds.
3
0
Q5
I can’t connect after turning off the
phone.
Turn on the phone and then tap the “CASIO
WATCHES” icon. Next, on the watch, hold
down (D) until the second hand points to [C]
twice.
●
The second hand will point to [C] once after
about 0.5 seconds, and then a second time
after about 2.5 seconds.
3
0
Phone-Watch Connection
Q1
I can’t establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and back on, and then
tap the “CASIO WATCHES” icon. Then on
the watch, hold (D) until the second hand
points to [C] twice.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3
0
Has the watch been re-paired with the
phone?
After deleting pairing information from
CASIO WATCHES, re-pair them.
l
Deleting Pairing Information from
CASIO WATCHES
l
C
Pair the watch with a phone.
If you are unable to establish a
connection...
Use the procedure below to delete the
pairing information from the watch, and
then re-pair the watch and phone.
l
Deleting Pairing Information from the
Watch
l
C
Pair the watch with a phone.
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Pair the watch with the phone.
l
If you purchase another phone
Auto Time Adjustment by
Bluetooth Connection (Time
Adjustment)
Q1
When does the watch adjust its time?
The watch will connect with the phone and
perform auto time adjustment at around 12:30
a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The
connection is automatically terminated after
auto time adjustment is complete. Also, time
signal auto receive will be performed if there
has been no auto time adjustment based on
connection between the watch and phone for
more than one day.
Q2
Auto time adjustment is performed,
but the time setting is not correct.
Is auto time adjustment not being
performed according to its normal
schedule?
Note that auto time adjustment is not
performed for 24 hours after swapping of
the Home Time and World Time, or after
the time setting is adjusted manually on
the watch. Auto time adjustment will
resume 24 hours after either of the above
operations is performed.
Is auto time adjustment enabled?
Auto time adjustment will not be
performed at the scheduled times unless
it is enabled. Enable auto time
adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
Watch Operation Guide 5672
30

Casio 5672 Specifications

General

Brand	Casio
Model	5672
Category	Watch
Language	English