EN-13
4. Press A to exit the setting screen.
• Resetting the seconds only (without changing the hour, minute, or DST setting)
causes the analog minute hand setting to be adjusted automatically. If you
change the hour, minute, or DST setting, you should also use the procedure
under “To adjust the analog time” (page EN-16) to adjust the analog hands
accordingly.
• See “Digital Time Daylight Saving Time (DST) Setting” (page EN-14) for details
about the DST setting.
• Resetting the seconds to 00 while the current count is in the range of 30 to
59causes the minutes to be increased by 1. In the range of 00 to 29, the
seconds are reset to 00 without changing the minutes.
• The day of the week is automatically displayed in accordance with the date
(year, month, and day) settings.
• The year can be set in the range of 2000 to 2099.
• The watch’s built-in full automatic calendar makes allowances for different
month lengths and leap years. Once you set the date, there should be no reason
to change it except after you have the watch’s battery replaced.
To Next Page
Loading...
Need help?
General
