EN-26
• If your location is not included in the preset city codes, select the preset city code
that is in the same time zone as your location.
• For full information on city codes, see the “City Table” at the back of this manual.
To set the World Time
1. In the World Time Mode, press D to scroll through
city codes.
2. Hold down A until the DST On/Off setting of the world
time starts to flash, which indicates the setting screen.
3. Press C to move the flashing in the sequence shown
below to select the other settings.
DST Hour Minute
C C
C
To Next Page
Loading...
