Playing with a Rhythm Backing
EN-104
You can use the procedure below to change the rhythm pattern change operation method and fill-in
operation method.
■ Changing the rhythm operation type to Type 2
1.
Press MENU.
This displays the menu screen.
2.
Use U and I to select the 5 buttons menu that includes SETTING.
3.
Press SETTING.
This displays the setting screen.
4.
Use U and I to select “Rhythm Controller Type”.
5.
Rotate the dial or use – and + to select the rhythm operation type.
• You can change the rhythm operation type to Type 2.
6.
To exit the setting operation, press EXIT.
Changing the Rhythm Pattern and the Fill-in Operation
Type
To Next Page
Loading...
