Operations Common to All Modes
EN-20
Use the procedures below to edit MY SETUP data names and USB flash drive file names (user data
names).
• USB flash drive (page EN-150) file names can be up to 231 characters long.
• Up to 22 characters can appear on the display at a time. If you input more than 22 characters, the
display will scroll horizontally, and a numeric page indicator (such as 1/11) will appear on the display.
• A file with a name that begins with “.” or “ ” (blank space) cannot be saved.
1.
Use U and I to move the cursor to the right of the location where you want to
insert a character.
2.
Press INSERT.
This inserts “A”.
• If you positioned the cursor to the right of the end of a character string, you can also rotate the
dial or use – and + to insert characters.
Inputting Characters
Inserting Characters
To Next Page
Loading...
