Configuring Settings
EN-141
Setting Item List
Function Name Description Display Name Setting
Transpose Can be used to raise the overall
pitch in semitone steps to make
it easier to play a piece written in
a difficult key, or to adjust to a
key that better matches a
vocalist, another musical
instrument, etc.
Transpose –12 to 0 to +12
(Initial Default: 0)
Touch off velocity Can be used to specify the
velocity value when Touch
Response is disabled.
Touch Off
Velocity
1 to 127
(Initial Default: 100)
Split point Can be used to change the
range of the lower keyboard
and/or the accompaniment
keyboard.
Split Point C2 to C7
(Initial Default: F#3)
Rhythm auto setting Can be used to disable
automatic setting of the tempo
and pattern when a rhythm is
selected.
Rhythm Auto Set Off, On
(Initial Default: On)
Chord fingering mode Can be used to specify the
chord fingering mode.
Chord Mode CASIO Chord,
Fingered 1,
Fingered 2,
Fingered on Bass,
Fingered Assist,
Full Range Chord
(Initial Default:
Fingered 1)
Rhythm Controller Type Can be used to change the
control method of rhythm
patterns and fill-ins.
Rhythm
Controller Type
Type 1, Type 2
(Initial Default:
Type 1)
Arpeggiator/Auto
Harmonize Button
Can be used to assign
arpeggiator or auto harmonize to
one of the 5 buttons on the tone
screen.
ARP/AH Button ARP, AH
(Initial Default:
ARP)
Rhythm volume level Can be used to adjust the
rhythm volume level.
Rhythm Volume 0 to 127
(Initial Default: 115)
Song volume level Can be used to adjust the song
volume level.
Song Volume 0 to 127
(Initial Default: 127)
Tuning Can be used to fine tune the
overall pitch by changing the
frequency of A4 in 0.1Hz units.
Tuning 415.5Hz to 440.0Hz
to 465.9Hz
(Initial Default:
440.0)
Surround Can be used to create a more
expansive sound.
Surround Off, On
(Initial Default: Off)
To Next Page
Loading...
