Playing a Built-in Song
EN-77
1.
Press SONG.
This displays the song screen.
2.
Rotate the dial to select a song.
This displays the category name of the selected song.
• For a list of song titles, see the “Song List” (page EN-179).
• After you rotate the dial once to select a song, you can change the selection further using – and +.
• If you want to select a category, use CAT–/CAT+.
• To go back to the previous screen, press BACK.
3.
Press a to start playback.
This displays current measure and beat numbers.
• If the song includes chord information, a chord also appears on the display.
4.
To stop playback, press a again.
• Starting to use the SONG function while the metronome is sounding stops the metronome. Or you can
sound a count in time with a song. See “Sounding a Count in Time with a Song” (page EN-84).
• If you don’t want the keyboard reverb type to be automatically matched to the recommended reverb
type setting of the song you choose, select “NOT AFFECT” for the reverb setting. See “Changing the
Relationship of Keyboard and Song Reverb Effects” (page EN-41).
Playing Songs
Starting or Stopping Song Play
To Next Page
Loading...
