Configuring Settings
EN-143
• The settings below are retained even when power is turned off.
– MIDI OUT Channel (Upper1, Upper2, Lower)
– Bluetooth
– MY SETUP power on recall
– Auto Power Off
– Battery type
– Display contrast
– Button long-press time
1.
Press MENU.
This displays the menu screen.
2.
Use U and I to select the 5 buttons menu that includes SETTING.
3.
Press SETTING.
This displays the setting screen.
4.
Use U and I to select “All Initialize”.
5.
Press ENTER.
This displays “Sure?”.
Returning Settings to Their Initial Factory Defaults
To Next Page
Loading...
