Using a USB Flash Drive
EN-153
1.
Insert the USB flash drive into the Digital Keyboard’s USB TO DEVICE port.
2.
Press MENU.
This displays the menu screen.
3.
Use U and I to select the 5 buttons menu that includes MEDIA.
4.
Press MEDIA.
This displays the media screen.
5.
Press LOAD.
6.
Press the button that corresponds to the type of data you want to load.
• If you pressed SONG, press the button that corresponds to the type of song data you want to
load.
7.
Rotate the dial or use – and + to select the file you want to load.
This displays the file name extension of the selected file.
8.
Press SELECT.
• If the data you are importing is tone recording, rhythm recording, part off recording, or all data,
advance to step 11.
9.
Rotate the dial to select the import destination number.
10.
Press SELECT.
This displays “Sure?”.
• “Replace?” is displayed if data already exists in the destination.
Loading Data From a USB Flash Drive to Digital Keyboard Memory
To Next Page
Loading...
