Controlling the Sound of a Performance
EN-35
■ Disabling the Pedal Effect for Individual Parts
1.
Press MENU.
This displays the menu screen.
2.
Use U and I to select the 5 buttons menu that includes PEDAL.
3.
Press PEDAL.
This displays the pedal screen.
4.
Press UPPER1.
• “U1” disappears from the display, indicating that the pedal effect is no longer applied to the
UPPER1 part.
5.
To apply the pedal effect to the UPPER1 part, press UPPER1 again.
• In the same way, you can stop the pedal effect from being applied to the UPPER2 part by
pressing UPPER2, and to the LOWER part by pressing LOWER. Pressing UPPER2 causes
“U2” to disappear from the display. Pressing LOWER causes “L” to disappear.
6.
To exit the setting operation, press EXIT.
• For information about parts, see “Layering and Splitting Tones” (page EN-52).
To Next Page
Loading...
