71
To print the individual PLU/sub-department READ report
This report shows sales for specific PLUs.
Note: See page 77 for a sample report.
☞ 1 After you press the p key, you can loop back and specify another PLU/sub-department number.
☞ 2 After you press the p key, you can loop back and press p again to specify the next sequential PLU/sub-
department number.
Printing RESET reports
You should print RESET reports at the end of the business day.
Important!
• The RESET operation issues a report and also clears all sales data from the cash register's memory.
• Be sure to perform the RESET operations at the end of each business day. Otherwise, you will not be
able to distinguish between the sales data for different dates.
☞
1
Report
print
☞
2
<PLU/SUB-
DEPARTMENT No.>
⁄
to
fi‚‚
ps
OW
A-A08
Mode Switch
Z
X
REG
OFF
RF
To Next Page
Loading...
