Operations Common to All Modes
EN-9
English
Holding down a button displays a menu of functions and/or tones like the one shown below to appear. The content
of the menu depends on the button that is held down.
Setting Shortcut Menus
Button Name Shortcut Menu Contents More Information
DUET Duet settings “Splitting the Keyboard for Duet Play”, page EN-14
CONCERT PLAY Concert Play volume level setting “To adjust the playback volume level of a Concert Play
song”, page EN-25
SONG Song data settings “Song >Ent” in the “Parameter List”, page EN-41
LAYER Layer settings “Layering Two Tones”, page EN-16
REC MIDI Recorder and Audio Recorder settings “Recording and Playback”, page EN-30
METRONOME Metronome settings “To configure metronome settings”, page EN-19
BERLIN GRAND BERLIN GRAND tone demo songs “Performing Demo Play”, page EN-28
HAMBURG GRAND HAMBURG GRAND tone demo songs
VIENNA GRAND VIENNA GRAND tone demo songs
Use the procedure below with functions that allow
playback of data.
PREPARATION
• Select the song you want to play back.
– Concert Play: “To listen to a Concert Play Song
(Listen Mode)” (page EN-23)
– Music Library: “To play back a specific music
library song” (page EN-26)
– MIDI Recorder: “To play back from Digital Piano
memory” (page EN-34)
– Audio Recorder: “To play back data recorded on a
USB flash drive” (page EN-36)
1.
Press the bpX/k button to start playback.
• Holding down the bms button during playback
fast reverses the track.
• Holding down the bnd button during playback
fast forwards the track.
• Press and releasing the bms button causes
playback to jump to the beginning of the track.
2.
Press the bpX/k button to pause playback.
• Press the bpX/k button again to resume playback.
• You can use the procedure in the next section to
repeat play a specific section of a song.
• This procedure is not supported during demo song
play (page EN-28).
1.
While a tune is playing, press the
blREPEAT button at when the beginning of
the section you want to repeat (Point A) is
reached.
• This causes “A” to flash on the display.
• This will cause the blREPEAT button to flash.
2.
Press the blREPEAT button again at when
the end of the section you want to repeat
(Point B) is reached.
• This causes “B” to flash on the display along with
“A”.
• This will cause the blREPEAT button to stop
flashing and remain lit.
• Repeat playback of the section from Point A to Point
B starts automatically.
• Holding down the bms button during repeat
playback jumps to Point A. Holding down the bnd
button during playback jumps to Point B.
3.
To exit repeat playback, press the
blREPEAT button.
• This will cause “A” and “B” to stop flashing on the
display.
Starting and Stopping
Playback
To repeat play a specific section of a song
AP700-ES-1B.indd 11 2015/04/06 12:22:56
To Next Page
Loading...
Need help?
General
