EN-10
Playing with Different Tones
Your Digital Piano has 26 built-in tones, which include
those of the world-renowned grand pianos. It also has
a Hall Simulator and other features (page EN-13) that
let you add effects that give you the feel of playing in
one of the world’s famous concert halls.
Use either of the two procedures below to select a tone.
• Select a tone in a tone group
• Select a tone in the tone list
• For information about tone group names and the
names of the tones in each group, see the “Tone List”
(page A-1).
Tone List
1.
Press one of the 5Tone Group buttons
below.
• The lamp of the button you press will light, and the
name of the tone will appear on the display.
• Pressing the button of the tone group that is currently
selected scrolls through the group tones without
leaving the group.
With this method, all of the Digital Piano’s tones are
included in the list, including those not assigned to a
tone group button.
1.
On the home screen (page EN-8), use the
clw and q arrow buttons to select the
tone name you want.
• The pointer (X) indicates the name of the currently
selected tone. Pressing a keyboard key plays the
selected tone.
• The pointer (X) does not stay in any particular tone
group.
• Holding down the clw or q arrow button scrolls
through tone names at high speed.
• You can use the clu and i arrow buttons to select
a tone group.
• To return to tone number 01 (BERLIN GRAND),
press the clw and q arrow buttons at the same
time.
2.
Press the cmENTER button to apply the
currently selected tone.
• The currently selected tone will also be applied
automatically if you do not perform any button
operation for about ten seconds in step 1.
2
bk ck cm cn co
3 85 79
bp
cl
Selecting and Playing a Tone
To select a tone in a tone group
Tone List/
Lista de tonos
Tone Group/
Grupo de
tonos
No./
Nº
Tone Name/
Nombre de tonos
To use the tone list to select a tone
AP700-ES-1B.indd 12 2015/04/06 12:22:56
To Next Page
Loading...
Need help?
General
