Casio CFX9850GBPLUS - Page 237

20070201
k Adjusting the Dynamic Graph Speed
You can use the following procedure to adjust the Dynamic Graph speed while the draw
operation is taking place.
1. While a Dynamic Graph draw operation is being performed, press A to change to the
speed adjustment menu.
• { } ... {Each step of the Dynamic Graph draw operation is performed each time you
press w .}
• {
} / { } / { } ... {slow (1/2 speed)}/{normal (default speed)}/{fast (double speed)}
• { STO } ... {stores graph conditions and screen data in Dynamic Graph memory}
2. Press the function key (1 to 4 ) that corresponds to the speed you want to change
to.
k Graph Calculation DOT Switching Function
Use this function to specify drawing of all the dots on the Dynamic Graph X-axis, or every
other dot. This setting is value for Dynamic Func Y= graphic only.
1. Press !m (SET UP) to display the Setup screen.
2. Press cc to select Y=Draw Speed.
3. Select the graphing method.
1 (Norm) … Draws all X-axis dots. (initial default)
2 (High) … Draws every other X-axis dot. (faster drawing than Normal)
4. Press J .
5-8-7
Dynamic Graphing
# To clear the speed adjustment menu without
changing anything, press w .
# Press !6 (G ↔ T) to return to the graph
screen.