20070201
  k  Student- t  Distribution
  u  Student- t  Probability Density
  Student- t  probability density calculates  t  probability density from a specifi ed  x  value.
  
  
  
  
  
  
  
  Perform the following key operations from the statistical data list.
  
  
  5 (DIST)
  2 (t)
  1 (tpd) 
  
  
  
  Data is specifi ed using parameter specifi cation. The following shows the meaning of each 
item.
  
   
x  ................................. data
   
df  ................................ degrees of freedom ( df  > 0)
  Save Res  .................... list for storage of calculation results (None or List 1 to 26)
  Execute ....................... executes a calculation or draws a graph
  
  After setting all the parameters, use c  to move the highlighting to “Execute” and then press 
one of the function keys shown below to perform the calculation or draw the graph.
  
  • 1 (CALC) ... Performs the calculation.
  • 6 (DRAW) ... Draws the graph.
  
  Calculation Result Output Example
  
  
  
  
  
  
  
  
  p .................................. Student- t  probability density
 (x) = 
Γ
Γ
df
π
–
df+1
2
2
df
2
df + 1
df
x
2
1+
 (x) = 
Γ
Γ
df
π
–
df+1
2
2
df
2
df + 1
df
x
2
1+
 # Current V-Window settings are used for 
graph drawing when the Setup screen’s [Stat 
Wind] setting is [Manual]. The V-Window 
settings below are set automatically 
    when the [Stat Wind] setting is [Auto].
     Xmin  = –3.2,  Xmax  = 3.2,  Xscale  = 1, 
     Ymin  = –0.1,  Ymax  = 0.45,  Yscale  = 0.1  
6-7-7
Distribution