20070201
7-1-2
Before Performing Financial Calculations
k Graphing in the TVM Mode
After performing a fi nancial calculation, you can use 6 (GRPH) to graph the results as
shown below.
• Pressing 1 (Trace) or !1 (TRCE) while a graph is on the display activates Trace,
which can be used to look up other fi nancial values. In the case of simple interest, for
example, pressing e displays PV , SI , and SFV . Pressing d displays the same values in
reverse sequence.
• Zoom, Scroll, and Sketch cannot be used in the TVM mode.
• Whether you should use a positive or a negative value for the present value (PV) or the
purchase price (PRC) depends on the type of calculation you are trying to perform.
• Note that graphs should be used only for reference purposes when viewing TVM mode
calculation results.
• Note that calculation results produced in this mode should be regarded as reference values
only.
• Whenever performing an actual fi nancial transaction, be sure to check any calculation
results obtained using this calculator with against the fi gures calculated by your fi nancial
institution.
To Next Page
Loading...
Need help?
General
