20070201
7-2-2
Simple Interest
Use the following function menus to maneuver between calculation result screens.
• { REPT } … {parameter input screen}
• { GRPH } … {draws graph}
After drawing a graph, you can press !1 (TRCE) to turn on trace and read calculation
results along the graph.
Each press of e while trace is turned on cycles the displayed value in the sequence:
present value (
PV ) → simple interest ( SI ) → simple future value ( SFV ). Pressing d cycles
in the reverse direction.
Press J to return to the parameter input screen.
To Next Page
Loading...
